##############
       ##
       ####
       ##
  ##   ##
  ##   ##
##############
www.zheng3.com

Thanks for downloading the Zheng3 Penny Catapult! 

Construction is snap-together, but a little super glue may be helpful in keeping the catapult stable during pitched battles. Assembly tips at http://zheng3.com/penny-catapult/

print the following models once:

* arm.stl
* crossbar.stl
* atlas.stl

print two of the following:

* side_brace.stl
* winding_key.stl
* strut.stl

print four of the following:

* footing.stl

Penny not included!

Have at thee! Rules for Seej can be found at http://www.s33j.net 

NOTE: Once this model is printed it may contain small parts that are unsuitable for children or pets. Do not attempt to eat this model.

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-
This model is distributed under the Creative Commons Attribution 3.0 Share-Alike License.

You are free:

to Share — to copy, distribute and transmit the work
to Remix — to adapt the work
to make commercial use of the work 

Attribution — You must attribute the work in the manner specified by the author or licensor (but not in any way that suggests that they endorse you or your use of the work).

Share Alike — If you alter, transform, or build upon this work, you may distribute the resulting work only under the same or similar license to this one. 

creativecommons.org/licenses/by-sa/3.0/us/

