Limit Switch Mount for OrdBot

admin | 10.12.2025

Previous model Next model

3D Preview

Loading 3D model...

LMB: Rotate | Scroll: Zoom | RMB: Pan

Gallery (3)

3D модель Limit Switch Mount for OrdBot - фото 1

3D модель Limit Switch Mount for OrdBot - фото 2

3D модель Limit Switch Mount for OrdBot - фото 3

(0) 72 30

This model is a mounting solution for limit switches designed for the OrdBot 3D printer chassis. It enables the easy installation of micro limit switches on the side rails, allowing for their activation during axis movement.

Construction Features:

Mounts on Makerslide using a single M4 screw.
Allows end nuts of V-roller wheels to trigger the switch.
Note that installation may result in a loss of approximately 8.5 mm of print surface on the X and Y axes.

Printing Recommendations:

Print three of these mounts.
Required components:

3 M4 screws, at least 5 mm long.
3 M4 T-slot nuts for Makerslide.
6 M3 screws, 12 mm long for the microswitch (you may need to enlarge the mounting holes on the switch).

Ensure the microswitch is properly oriented to maintain its sensitivity.