Open RC Truggy Tire Mold

admin | 10.12.2025

Previous model Next model

3D Preview

Loading 3D model...

LMB: Rotate | Scroll: Zoom | RMB: Pan

Gallery (32)

3D модель Open RC Truggy Tire Mold - фото 1

3D модель Open RC Truggy Tire Mold - фото 2

3D модель Open RC Truggy Tire Mold - фото 3

3D модель Open RC Truggy Tire Mold - фото 4

3D модель Open RC Truggy Tire Mold - фото 5

3D модель Open RC Truggy Tire Mold - фото 6

3D модель Open RC Truggy Tire Mold - фото 7

3D модель Open RC Truggy Tire Mold - фото 8

3D модель Open RC Truggy Tire Mold - фото 9

3D модель Open RC Truggy Tire Mold - фото 10

3D модель Open RC Truggy Tire Mold - фото 11

3D модель Open RC Truggy Tire Mold - фото 12

3D модель Open RC Truggy Tire Mold - фото 13

3D модель Open RC Truggy Tire Mold - фото 14

3D модель Open RC Truggy Tire Mold - фото 15

3D модель Open RC Truggy Tire Mold - фото 16

3D модель Open RC Truggy Tire Mold - фото 17

3D модель Open RC Truggy Tire Mold - фото 18

3D модель Open RC Truggy Tire Mold - фото 19

3D модель Open RC Truggy Tire Mold - фото 20

3D модель Open RC Truggy Tire Mold - фото 21

3D модель Open RC Truggy Tire Mold - фото 22

3D модель Open RC Truggy Tire Mold - фото 23

3D модель Open RC Truggy Tire Mold - фото 24

3D модель Open RC Truggy Tire Mold - фото 25

3D модель Open RC Truggy Tire Mold - фото 26

3D модель Open RC Truggy Tire Mold - фото 27

3D модель Open RC Truggy Tire Mold - фото 28

3D модель Open RC Truggy Tire Mold - фото 29

3D модель Open RC Truggy Tire Mold - фото 30

3D модель Open RC Truggy Tire Mold - фото 31

3D модель Open RC Truggy Tire Mold - фото 32

(0) 100 247

Model Description: This model is a mold for casting lightweight and durable OpenRC Truggy Tires.

Usage: It is designed for creating tires for remote-controlled vehicles.

Construction Features: The tire weighs less than 130g and is designed for original rims. The mold must be treated with paraffin before pouring the polyurethane mixture.

Printing Recommendations: It is recommended to use PLA with settings: layer height of 0.2mm, 4 layers, and 40% infill. For assembly, you will need 12 M3x70 screws and 12 M3 nuts. For casting, use AXSON UR 3450 - BLACK POLYURETHANE CASTING ELASTOMER with a hardness of 80A. Use vacuum to remove bubbles after mixing the polyurethane. The mold can be used without a top cover; simply cut the top edge after 24 hours.