Open Peg Stacking System

admin | 11.12.2025

Previous model Next model

3D Preview

Loading 3D model...

LMB: Rotate | Scroll: Zoom | RMB: Pan

Gallery (15)

3D модель Open Peg Stacking System - фото 1

3D модель Open Peg Stacking System - фото 2

3D модель Open Peg Stacking System - фото 3

3D модель Open Peg Stacking System - фото 4

(0) 73 126

Model: The Open Peg Stacking System is designed for creating stable structures using open pegs.

Purpose: This model is ideal for situations where traditional clip systems may be visually or functionally inconvenient.

Construction Features:

The main component involves Boolean operations that create two small female ends on the bottom of the part.
Pegs should be placed in the center of the model.
Note that GameSpace3D models often include a floor component not used in traditional clip systems.

Printing Recommendations: Ensure peg holes align with those in the main model. It is recommended to use pegs with a thickness of about 5 mm, although thinner options are possible. Create a grid form for structural strength. Printing settings should account for the depth of Boolean operations, which should be at least 3 mm.