Airduino Case for Flight Instruments

admin | 11.12.2025

Previous model Next model

3D Preview

Loading 3D model...

LMB: Rotate | Scroll: Zoom | RMB: Pan

Gallery (19)

3D модель Airduino Case for Flight Instruments - фото 1

3D модель Airduino Case for Flight Instruments - фото 2

3D модель Airduino Case for Flight Instruments - фото 3

3D модель Airduino Case for Flight Instruments - фото 4

(0) 98 158

The Airduino model is a case designed for a Primary Flight Display (glass cockpit) intended for experimental aircraft. This is an open-source experimental project currently in beta testing.

Purpose: The model serves to create a flight display that can be installed in experimental aircraft.

Construction Features:

AirduinoBezel: The front face of the instrument, print as shown.
AirduinoLayer2: Screws to the back of the bezel, holding the Arduino Mega 2560 and screen; print flipped over.
AirduinoLayer3: Glued to the back of Layer2 to minimize support; print flipped over.
AirduinoBatteryPowerCover: Not used in the current version but may be relevant in future developments.
AirduinoPitotStaticCover: Attached to the back of Layer3 with silicone sealant and screws to provide airtight seals.
AirduinoSensorHolder: An optional part used to hold the battery and other components; print with ribs facing up.
AirduinoKnobs: Knobs for the encoder switch, print with openings down.

Printing Recommendations: Follow the instructions for part orientation for optimal results.