Hatch Support for MacGregor 26C

Model Overview: The hatch support for MacGregor 26C sailboats is designed to hold the front hatch in various positions for ventilation.

Purpose: This part allows the hatch to be fixed in four positions, ranging from a slight crack to fully open (approximately 45 degrees), providing easy access and ventilation.

Design Features: The support can be operated with one hand. All corners are rounded to prevent injury. The base is designed to be thin to save space and acts as a breakaway point under excessive load. Installation requires two 1 1/4-inch screws for the base and two short 1/2-inch screws for the hatch attachment.

Printing Recommendations: It is recommended to print with outdoor-suitable materials like PETG or ABS. The print should be strong with thick walls and sufficient infill. Supports are advised for the base and attachment, and the attachment should be printed upside down.