Retro Microphone Lamp (parts)

admin | 16.12.2025

Previous model Next model

3D Preview

Loading 3D model...

LMB: Rotate | Scroll: Zoom | RMB: Pan

Gallery (13)

3D модель Retro Microphone Lamp (parts) - фото 1

3D модель Retro Microphone Lamp (parts) - фото 2

3D модель Retro Microphone Lamp (parts) - фото 3

3D модель Retro Microphone Lamp (parts) - фото 4

(0) 93 121

The Retro Microphone Lamp model is designed for easy cable routing through the base and stem to the LED light. Key elements have been redesigned in Fusion 360:

Base
Stem – enlarged and designed as a single piece.
Yoke – width increased by 5mm to prevent breakage during microphone installation.
Spacers – ensure proper connection between the microphone and yoke.
Nuts – adjusted to 3mm to match the yoke's increased width.

The banner has also been redesigned for support-free printing. It is recommended to print the stem vertically with a brim, and to print the base upside down to avoid supports. Note that the thread tolerances are tight, so careful assembly of parts is required.