Toyota Forklift 5FD25 - Model 1/32

admin | 30.11.2025

Previous model Next model

3D Preview

Loading 3D model...

LMB: Rotate | Scroll: Zoom | RMB: Pan

Gallery (5)

3D модель Toyota Forklift 5FD25 - Model 1/32 - фото 1

3D модель Toyota Forklift 5FD25 - Model 1/32 - фото 2

3D модель Toyota Forklift 5FD25 - Model 1/32 - фото 3

3D модель Toyota Forklift 5FD25 - Model 1/32 - фото 4

(0) 63 281

The model is drawn in 1/32 scale. For LGB size, it can be printed enlarged by a factor of 1.33, resulting in a 1/24 scale, which allows the use of 4mm axles. If printed at a different scale factor, axles and disks must be drilled to match the size of the axles.

Additional parts needed:

3mm metal axles (4mm if scaled to LGB size)
1mm stiff wire to make extra control arms

How to print:

The model is printed with regular PLA, and the tires are printed from TPU. Parts are divided according to the colors used in the original. If you don't want to spray the details, you can use dark blue and orange thread. The model can be made with movable cylinders or with static cylinders to hold the mast. Printing moving cylinders is a bit tricky, so if you're in doubt about your printer's capabilities, use the static version (the bright blue one when unassembled).

Assembly:

The body parts should be glued together. The mast is designed to be movable. The mast and fork parts can simply be glued together. The fork parts should be inserted into the center of the holder and moved to the side. The rear axle should be inserted at an angle of approximately 15°. It is self-locking in a horizontal position.