3D Model of Toyota Prius Key

admin | 30.11.2025

Previous model Next model

3D Preview

Loading 3D model...

LMB: Rotate | Scroll: Zoom | RMB: Pan

Gallery (4)

3D модель 3D Model of Toyota Prius Key - фото 1

3D модель 3D Model of Toyota Prius Key - фото 2

3D модель 3D Model of Toyota Prius Key - фото 3

3D модель 3D Model of Toyota Prius Key - фото 4

(0) 103 106

This 3D model is designed for creating a keyless entry remote for Toyota Prius and consists of three parts:

housing 1: place the motherboard in this part on the side;
housing 2: insert the Cr 2032 battery and the small magnetic part from your original key;
physical_key_2: remove the key from the original plastic key part and place it in the printed part.

When installing the key into place, some effort may be required. Once the three pieces are prepared, simply press them together and place the key in position. Be careful with the latches and the battery's orientation to avoid breaking the battery holder from the motherboard.

The STEP file is included in the build. Note: it does not fit into the car key slot and is intended for Smartkey versions of Toyota Prius 2.