Low Poly XX-Pandable Fidget

admin | 02.01.2026

Loading 3D model...

LMB: Rotate | Scroll: Zoom | RMB: Pan

(0) 35 12

Introducing the updated Low Poly XX-Pandable Fidget, designed for FDM printing. Key features include:

Tolerances: 0.4 mm nozzle, 0.4 mm extrusion width, 0.2 mm layer height.
Initial position: raise the model by 1 mm on the Z-axis to start printing on supports.
Supports: requires 3 support interface layers with 0.1 mm top interface spacing.
Enhanced supports: more supports needed than indicated, with finer line spacing.
Seam alignment: seams should be aligned on outer corners to prevent issues with pivot holes.
Filament: recommended to use strong filament with good layer adhesion, like SUNLU Pastel-Colors Matte PLA.

More variations are coming. Happy printing!