HOn3 RGS Style Trestle 'Mix n Match'
admin | 02.01.2026
3D Preview
Loading 3D model...
Gallery (25)
This model is an adaptation of a trestle in HOn3 scale based on the original design from Thingiverse.
- Includes: 3 styles of vertical supports (Bents) and 1 abutment.
- Variety: Multiple lengths of top sections, including one for an approximately 460mm radius curve.
All parts are printed in PLA using default settings. It is recommended to use medium thick CA glue for assembly.
Ties with or without rail guides and top side planks have been added. When building a curved trestle, draw the track centerline and outer tie lines (+/-15mm from the track center). If using ties with rail guides, slide the track profiles in (compatible with Peco and Shinohara tracks), temporarily fix the ties on the template, and glue on the outer planks (trimming required). Once the glue has cured, flip over and glue on the horizontal supports. Attach the trestle bents. Please leave a like on the original design.
-
Trestle_Bent_H0n31.stlDownload
-
Trestle_Abutement_H0n32.stlDownload
-
HOn3_Trestle_Top_48mm_Straight1.stlDownload
-
H0n3_Trestle_Top_Straight_96mm.stlDownload
-
H0n3_Trestle_Top_Straight_144mm.stlDownload
-
H0n3_Trestle_Curved_48mm_for_460mm_Radius.stlDownload
-
Trestle_Bent_H0n3_short.stlDownload
-
H0n3_Trestle_Bent_Short_River2.stlDownload
-
H0n3_Trestle_Ties_w._Planks_no_Rail_Guides.stlDownload
-
H0n3_Trestle_Ties_and_Top_Plank1.stlDownload
-
H0n3_Trestle_Ties_and_Top_Plank.stlDownload
-
H0n3_Bridge_Tie_2_Piece1.stlDownload
Please login to post comments.
Information
- Author: admin
- Date: 02.01.2026
- Category: Architecture
- Views: 31
- Downloads: 76
- Likes: 0
- Images: 25
- Files: 12
Download ZIP
