SCX30 RTI Ramp Model for Off-Road Vehicles
admin | 02.01.2026
3D Preview
Loading 3D model...
LMB: Rotate | Scroll: Zoom | RMB: Pan
Gallery (10)
The SCX30 RTI Ramp model is designed for SCX30 size vehicles, offering up to 50mm of articulation with a 25-degree incline.
Assembly Instructions
- Start with the pillars: apply a thin strip of super glue to the slot at the end with the tallest pillars.
- Insert the DegreeLabel_Backing into the slot, ensuring the small nub is on the opposite side of the pillars.
- Apply glue to the nub and attach the 25deg DegreeLabel.
- Place the MainRamp onto the pillars and press it into position, adding glue to the pillar nubs if necessary.
- If your printer cannot achieve the required tolerance, the nubs can be trimmed, and the MainRamp can be glued on.
- Apply glue to the nubs on the sides of the pillars and press the MeasureUnits into place.
Allow to dry.
Please login to post comments.
Information
- Author: admin
- Date: 02.01.2026
- Category: Auto & Moto
- Views: 32
- Downloads: 43
- Likes: 0
- Images: 10
- Files: 5
Download ZIP
Model Author
×
❮
![]()
❯