Couple Interlocking Heart Desk Decor

This is a clean, modern Couple Heart Desk Decoration designed in Fusion 360. The design consists of two parts: Couple Interlocking Heart – can stand on its own Optional Display Base – press-fit (snug fit), no glue needed The base is not mandatory, but it improves stability and gives a more finished, professional look on your desk, shelf, or bedside table. The model is optimized for easy printing: No supports required No glue required Beginner-friendly Prints cleanly in PLA Great as: Valentine’s gift Anniversary decor Couple desk ornament Minimal home decor piece 🖨️ PRINT SETTINGS (Recommended) Material: PLA (PLA+, Silk PLA, or Matte PLA works great) Supports: ❌ Not needed Assembly: ✅ Press-fit (no glue) Skill Level: Beginner Suggested slicer settings: Layer height: 0.2 mm Walls: 2–3 Infill: 10–15% Brim: Optional (if bed adhesion is weak) Fit note (optional): If the base feels too tight, scale the heart to 99.8–99.9% or lightly sand the feet. 🧩 ASSEMBLY INSTRUCTIONS Print both parts: Couple Heart + Base (optional) Align the heart feet with the slots in the base Press down gently until fully seated Enjoy your display! (You can also display the heart without the base.) Настройки печати и инструкции