Modular Bottle Rack

admin | 13.03.2026

Previous model Next model

3D Preview

Loading 3D model...

LMB: Rotate | Scroll: Zoom | RMB: Pan

Gallery (6)

(0) 25 49

Max bottle diameter: 84 mm.

Use 3/8 (9.52 mm) dowels to connect printed hexagons. For 10 mm dowels, scale XY to 105%. If the dowels do not fit snugly, adjust the model scale in XY.

Depending on the orientation of the hexagons, you will need a minimum of 2 (top/bottom) or 4 dowels per hex (1 top/3 bottom, 2 top/2 bottom, or 4 bottom configuration).

Dowels should be flush with the hexagons on the front side, while on the back side, they can be optionally extended (5-20 mm) to facilitate easier bottle placement.

Printing settings: Follow the guidelines for optimal results.