Hotas Warthog Mount

admin | 17.03.2026

Previous model Next model

3D Preview

Loading 3D model...

LMB: Rotate | Scroll: Zoom | RMB: Pan

Gallery (13)

(0) 3 2

Overview: This mount is designed for the Hotas Warthog system.

Assembly: You will need the following parts for assembly:

2 large extension springs
20 M5 screws, approximately 80 mm long
M5 washers for secure fastening

The support arm is suitable for desks with a thickness of 27.5 mm. If your desk is of a different thickness, you may need to adjust the scale or modify the model slightly.

Printing Orientation: The support arm must be printed on its side, as shown in the images. This orientation is crucial for ensuring optimal mechanical strength. Printing in a different orientation may weaken the part, leading to failure under load. Printing it sideways aligns the layers for improved stress resistance and bending strength, making the mount more reliable during use.