BMW E34 rear seat belt outlet cover

Problem: The plastic trims on the rear parcel shelf of the BMW E34, through which the seat belts pass, become extremely brittle over decades of use when exposed to ultraviolet radiation. They crack, fade, or simply fall apart when you try to remove the rear parcel shelf. Without this cover, the interior of a classic car will look unkempt, and the sharp edges of broken plastic can damage the belt webbing. Solution: This digital 3D model is a highly accurate copy of the original decorative overlay. It is designed to fit the factory grooves and curve of the rear parcel shelf, allowing you to return the interior of your BMW E34 to its original factory appearance. Model specifications: Compatibility: BMW 5 Series (E34) - sedan and station wagon (Touring). Suitable for left, right and center (depending on equipment) belt exit points. OEM Part Numbers for reference: 72111944511, 72118105747 (and similar trim codes). File format: STL (completely ready for 3D printing, checked for errors). Design: Optimized for easy “click” installation into a standard seat. 3D Printing Recommendations: Since the part is located under the rear window and is exposed to intense heat and UV radiation: Material: ASA or ABS recommended. ASA is an ideal choice as it does not fade in the sun. PETG is acceptable if painting is planned. PLA cannot be used (it becomes deformed on the first hot day). Filling: 20–30% (Grid or Gyroid type). Layer height: 0.1 – 0.15 mm for a smooth texture. Post-treatment: To achieve a perfect match with the interior color (Black, Silvergrau, Pergament), it is recommended to use a structural paint for interior plastics. Benefits: Restoration: An essential part for anyone restoring the interior of an E34 to stock condition. Savings: The cost of printing is a pittance, while new original overlays have long been discontinued or are unreasonably expensive. Availability: Instant file download immediately after payment.