Air intake cover Skoda Yeti (VAG)

Problem: The plastic intake cover above the radiator is a part that often suffers from temperature changes and mechanical stress. Over time, the latches become brittle and break off, or the lid is forgotten to be secured after replacing the filter or repairing it. Driving without it disrupts the standard air intake and spoils the aesthetics of the engine compartment. Solution: This digital 3D model is an exact copy of the original duct cover with article number 1KD805965. It is designed taking into account all seats and guides, which allows you to restore the tightness of the intake system. Model specifications: Compatibility: Skoda Yeti (5L), Skoda Octavia A5, VW Golf 5/6, VW Jetta 5/6, VW Tiguan, Seat Leon. OEM Article: 1KD805965 (1KD 805 965). Purpose: Covers the upper part of the air intake housing in front of the air filter. File format: STL (high accuracy, tested for compilability). 3D Printing Recommendations: The part is located in the engine compartment, where strong heating from the engine is possible: Material: ABS, ASA or PA (Nylon) recommended. These materials withstand high temperatures under the hood and do not deform. It is not recommended to use PLA and PETG (they can “float” when the engine heats up in traffic jams). Filling: 20–40% (enough for strength, the part is not strong). Layer height: 0.15 – 0.2 mm. Installation: Simply snaps into the standard grooves of the air duct housing. Benefits: Factory Look: Restores original intake design. Savings: The price of the STL file and printing is significantly lower than the cost of a new part from the dealer. Instant access: Download the file and start printing right away.