Volvo Mirror Cover Clamp Kit (PN 9151566)

Problem: Original Volvo mirror cap clamps become brittle over time and break when first removed for painting or repair. Without these small clips, the mirror cover vibrates or may even fly off on the highway. It is almost impossible to find them separately for sale, and replacing the entire mirror is an unreasonably expensive solution. Solution: This digital 3D model is a direct replacement for the factory Volvo mirror cover clamps PN 9151566. This is an accurate repair kit that allows you to restore the trim to the original fixing in a matter of minutes. Model specifications: Compatibility: Wide range of models on P80, P2 and P3 platforms, including Volvo S60, S70, S80, V70, XC70 and XC90. OEM Article No: Complete replacement of part 9151566. Purpose: Rigid fixation of the outer decorative cover to the side mirror body. File format: STL (optimized for printing without supports). 3D Printing Recommendations: In order for the clamps to snap correctly and serve for a long time, it is extremely important to choose the right material: Material: ASA or similar engineering plastics are recommended. They have the necessary flexibility and UV resistance. PLA and PETG are not suitable as they are too brittle or soften in the sun. Print options: Print on a flat surface. No supports or brim are required - the model is designed to be as easy to print as possible. Filling: 100% (Solid) for maximum bending strength. Layer height: 0.1 – 0.15 mm. Benefits: Exact copy: The geometry is completely consistent with the original 9151566. Savings: Repairing a mirror costs a few grams of plastic. Instant access: The file is ready to download and print immediately after payment.