Mounting (basket) for parking sensors Hyundai Kona 2018

Problem: Hyundai Kona owners often experience parking sensors falling inside the bumper due to broken or peeling plastic holders. It is almost impossible to buy an original fastener separately from a new bumper, and universal Chinese fasteners often do not fit the angle of inclination or diameter of the hole. Solution: This digital 3D model is an exact copy of the standard mount (basket) for PDC sensors. It is designed to match the geometry of the Kona bumper, which ensures that the sensor beam is directed correctly and eliminates false alarms. Model specifications: Compatibility: Hyundai Kona (OS), model years 2017, 2018, 2019, 2020, 2021, 2022. OEM Part Numbers for Reference: 86584J9000 (Front), 86581-K4000 (EV), 86356-J9110. Purpose: Fixing the parking sensor (PDC) inside the front or rear bumper. File Format: STL (High Fidelity, Print Ready). 3D Printing Recommendations: The part is located on the inside of the bumper and is subject to vibration and moisture: Material: ABS, ASA or PETG recommended. These plastics have sufficient strength and temperature resistance. PLA cannot be used (it will become brittle and may soften in the heat from the heated asphalt). Filling: 40–100% (for secure latches). Layer height: 0.15 – 0.2 mm. Installation: Thoroughly clean and degrease the surface of the bumper before gluing. It is recommended to use high-quality double-sided tape (such as 3M VHB) or special glue for plastic. Benefits: Accurate Orientation: The sensor will be positioned at the correct angle as it came from the factory. Savings: Repairs cost pennies without purchasing a new bumper or expensive used spare parts. Speed: Download your file and print your replacement in just 30-40 minutes.