BMW F10 / F11 (M-Sport) towbar cover

Problem: The front bumper of the BMW 5 Series M-Packet has an aggressive design that is spoiled even by the absence of one small part. The original towing hole cover is often lost, and it is difficult to find one in body color at disassembly sites. Buying a new part requires priming and painting anyway, so why pay extra for a piece of factory plastic? Solution: This digital 3D model is a high-precision copy of the front bumper cover for the BMW 5 Series (F10/F11) M Sport. The model fully corresponds to the original article number 51118055986 and is designed to fit perfectly into the standard bumper mounts. Model specifications: Compatibility: BMW 5 Series (F10 Sedan, F11 Estate) M-Sport / M-Tech Front Bumper ONLY. OEM Article: 51118055986 (51 11 8 055 986). Purpose: Closes the technological hole of the towing hook in the front bumper. File format: STL (optimized for printing with minimal support). 3D Printing Recommendations: Since the part is located on the front of the car and is exposed to sandblasting, stones and the sun: Material: ASA or ABS recommended. ASA is the best choice as it is UV resistant and easy to sand. PLA is absolutely not suitable (it will soften in the sun), PETG is acceptable only for high-quality painting. Filling: 30–50%. Layer height: 0.1 – 0.15 mm to obtain the smoothest possible surface for painting. Post-processing: Sanding with fine sandpaper, primer on plastic and painting in the color of your body. Benefits: Perfect Fit: Tested to match M bumper geometry. Savings: The cost of the file is several times lower than the cost of the original spare part. Instant results: Printing takes about 1 hour – and your BMW looks flawless again.