BMW E30 Headlight Intake Manifold

admin | 01.12.2025

Previous model Next model

3D Preview

Loading 3D model...

LMB: Rotate | Scroll: Zoom | RMB: Pan

Gallery (4)

3D модель BMW E30 Headlight Intake Manifold - фото 1

3D модель BMW E30 Headlight Intake Manifold - фото 2

3D модель BMW E30 Headlight Intake Manifold - фото 3

3D модель BMW E30 Headlight Intake Manifold - фото 4

(0) 72 93

Description: Replaces the high beam headlight on the passenger or driver side.

3" outlet easily connects to the air chamber using a 3" flexible hose.
Can connect to aftermarket inline airboxes.
Narrow gap due to center support behind the driver's side headlight, but a 3" hose will still fit.
When connecting a hose, it may be difficult to put the clamp on, but it will fit at the correct angle.
Tested on late model headlights and driver's side only, but should work on both sides.
Smooth the intake with wood putty and high filler primer for a smooth appearance.

INSTALLATION: Remove the high beam headlight from the housing. You MUST remove the 3 headlight adjustment rods by turning them near the housing and sliding them out. The holes on the inlet will align with holes on the adjusting rods. I secured it with zip ties for easy removal, and used bolts with washers and nuts for a more secure installation.

Printing: Printed at 0.2 layer thickness with 15% infill on Maker Select Plus from regular PLA; If you want it to last a long time, print it out of ABS plastic as it is weather resistant.