BMW E46 Window Switch

admin | 01.12.2025

Previous model Next model

3D Preview

Loading 3D model...

LMB: Rotate | Scroll: Zoom | RMB: Pan

Gallery (11)

3D модель BMW E46 Window Switch - фото 1

3D модель BMW E46 Window Switch - фото 2

3D модель BMW E46 Window Switch - фото 3

3D модель BMW E46 Window Switch - фото 4

(0) 45 31

This is a BMW E46 window switch that may be compatible with other models and makes of vehicles. Please check compatibility on your own.

INSTRUCTIONS:

Do not use PLA for printing. It is recommended to use ABS, PETG, or similar materials.
Print the part on one side so that the filaments are perpendicular to the imaginary line between the hinges.

Use the following printing settings:

Material: PETG
Nozzle temperature: 240C
Bed temperature: 70C
Infill: 100%
Layer height: 0.28 mm
Initial speed: 8 mm/s

After installing the button, it may require a bit of pushing and pulling before it works properly. It is advisable to do this with the electronic switch detached. Good luck!

NOTE: The images are 2D scans of the original part used for reference.