Cup Holder for Hyundai i800

admin | 01.12.2025

Previous model Next model

3D Preview

Loading 3D model...

LMB: Rotate | Scroll: Zoom | RMB: Pan

Gallery (1)

3D модель Cup Holder for Hyundai i800 - фото 1

(0) 47 37

This model is designed to replace the broken cup holder in the Hyundai i800. To install, you need to completely remove the original slot. The 3D print can then be inserted into the available space to create a permanent double cup holder.

Printing and Assembly Notes:

The project is designed for printing on the Creality Ender-3 v3 SE in two parts due to limited print volume.
Cura was used to slice with 15% cubic fill and regular PLA for printing.
The model is designed to be printed upside down.
You will need 4 M3*16 bolts with matching washers and nuts to connect the two parts.
If you don't have any bolts, glue should work as well.
Check for compatibility with your vehicle.
It is advisable to print the smaller part first for consistency check.

This is not an official Hyundai part. It has not been safety tested or approved. Use at your own risk.