Honda Key Fobs in 2 Colors

admin | 03.12.2025

Loading 3D model...

LMB: Rotate | Scroll: Zoom | RMB: Pan

(0) 44 22

This is a 3D model of a Honda key fob created in two colors. Below are the printing instructions:

Software: Model was drawn in AutoCAD and sliced with Slic3r on Repetier Host.
Printer: Printed on Printrbot Simple Metal.
Materials: Used Printrbot White and Blue PLA at 208 degrees.
Print Settings: Modified settings: top and bottom layer thickness changed from 3 to 5 mm, infill increased from 20% to 40%.

Instructions for Multi-Color Printing:

Print the base in any color you like.
Print 1 or 2 layers of the H logo, then pause the print.
Quickly use manual control to raise the Z-axis about 40 mm to prevent the hot end from touching the part.
Quickly swap filament colors in the extruder.
Click continue printing. It will print great in about 24 minutes each.