Motorcycle Keychain with Spinning Wheels
admin | 03.12.2025
3D Preview
Loading 3D model...
Gallery (6)
This motorcycle keychain features spinning wheels. The body and wheels are printed separately and then plugged together. The wheels can be printed either as a full part or as a rim and tire separately. The rim is pressed tightly into the tire, ensuring a snug fit. To install, you can use a hammer or simply step on the wheel.
You can adjust the size by printing it slightly smaller or larger (by 1-2%). If printed in two parts, the overall appearance of the wheel is improved as the rubber part can be black while the rim can be any color you prefer. You can also give the body a third color.
The two wheels should spin freely on the body; if they don't, remove any imperfections using a cutter or by sanding. The pin for fixing the wheels is designed for a tight press fit and should not come out when inserted.
There is also a simpler version of the body available (body_simple.stl) which I designed first. The body.stl file features more details and a sportier look. The key ring should be attached to the rear end of the body.
All parts were printed on my Ender-3 using PLA at a relatively low speed (40mm/s) and a layer height of 0.15mm.
Please login to post comments.
Information
- Author: admin
- Date: 03.12.2025
- Category: Auto & Moto
- Views: 71
- Downloads: 151
- Likes: 0
- Images: 6
- Files: 6
Download ZIP
