Cage for Redcat Gen 8 with Jeep Wrangler Body

admin | 03.12.2025

Previous model Next model

3D Preview

Loading 3D model...

LMB: Rotate | Scroll: Zoom | RMB: Pan

Gallery (17)

3D модель Cage for Redcat Gen 8 with Jeep Wrangler Body - фото 1

3D модель Cage for Redcat Gen 8 with Jeep Wrangler Body - фото 2

3D модель Cage for Redcat Gen 8 with Jeep Wrangler Body - фото 3

3D модель Cage for Redcat Gen 8 with Jeep Wrangler Body - фото 4

(0) 44 195

This is a cage for the Redcat Gen 8 designed for use with an inexpensive Chinese Jeep Wrangler body shell. Note that the Chinese bodies are slightly shorter than standard ones, so they may not fit perfectly with name-brand shells as-is; the front and back sections may be about 10-15mm too short.

Assembly Instructions:

You will need M2 screws for assembly, or brad nails and glue, or a combination of both.
Print parts lying down for maximum strength.
If you want to use the battery tray, it slides over the Redcat battery tray in front; I glued the brace to the tray and screwed it to the chassis with the body mount installed.
For using the seats, glue them to a rectangular cardboard box with a cutout for the Redcat battery tray.

Additional links to detailed models:

Use at your own risk.