Antenna for Jeep Liberty and Other Models

admin | 03.12.2025

Previous model Next model

3D Preview

Loading 3D model...

LMB: Rotate | Scroll: Zoom | RMB: Pan

Gallery (1)

3D модель Antenna for Jeep Liberty and Other Models - фото 1

(0) 58 168

This antenna is designed for the 2008 Jeep Liberty but may also fit the Dodge Nitro, Journey, Avenger, and Chrysler Sebring/200. You will need:

M5x16 screw
M5 nut
two washers
about 30" of wire (I used enameled wire)
super glue or adhesive of your choice

The design consists of three parts:

Base: Two files provided, one with a hex cutout for the nut and one without. This holds the screw and nut, and where the wire connects.
Internal Element: For wrapping the wire around. You can use less than 30" of wire, but it may reduce reception quality.
Cover: This protects the internals and keeps it dry. I added a fin for aesthetics, but you can modify the design in FreeCAD.

Assembly: Wrap the wire around the screw, secure the nut, and tighten the screw. Insert the internal support into the base and wrap the wire around it. Ensure the assembly is securely fastened. Once assembled on the car, glue the housing to the base to maintain alignment.

Using PETG for printing is recommended due to its durability.