3D Printed RPG-7B

admin | 04.12.2025

Previous model Next model

3D Preview

Loading 3D model...

LMB: Rotate | Scroll: Zoom | RMB: Pan

Gallery (28)

(0) 97 556

This is a 3D printed model of the RPG-7B, made to scale 1:1. Note that this is NOT a working replica!

Required materials:

2 steel (or PVC) pipes:

outer diameter ф48 mm (1.88 inches)
outer diameter ф60 mm (2.36 inches)

M4X10 and M4X20 bolts and nuts

For the handle, you need to weld steel pieces at 90 degrees and then slide the handles on top. Use metal that is 5mm thick and 30mm wide. The parts were mostly printed from PETG, but PLA and other materials will also work.

For the “wood” parts, use cocoa-colored spray paint as a base, then apply rosewood-colored lacquer on top. For the rest, use matte black spray paint and a matte clear coat to seal everything. To make the lettering more pronounced, you can use a white marker.

This is still a work in progress, so the model is subject to change. If you have any suggestions or comments, please leave them.