Case for Full Graphic Smart LCD Controller

admin | 05.12.2025

Loading 3D model...

LMB: Rotate | Scroll: Zoom | RMB: Pan

(0) 67 77

This is a case for the Full Graphic Smart LCD Controller.

Instructions:

The case design features a channel between the top and bottom parts for a flatter appearance.
It is recommended to print the components in different colors.
To attach the controller board to the bottom part, first place the distance cylinders and use M3 x 12 (or 14) screws.
There is no room for hexagonal pockets in the top part; you can screw M3 x 16 directly into it.
The second bottom part contains several screw nut deepenings for fastening the case as desired.
If mounted on an 8 mm rod, you can use the case clamps.
With cables plugged in, the case has an inevitable slope of 6°.
If you need more slope, a base that can be screwed below the housing will be published separately.
Remember to assemble the distance cylinders — the display's board won't appreciate it.