MHQ2 Folding Mini Quadcopter - 3D Model

admin | 05.12.2025

Previous model Next model

3D Preview

Loading 3D model...

LMB: Rotate | Scroll: Zoom | RMB: Pan

Gallery (10)

3D модель MHQ2 Folding Mini Quadcopter - 3D Model - фото 1

3D модель MHQ2 Folding Mini Quadcopter - 3D Model - фото 2

3D модель MHQ2 Folding Mini Quadcopter - 3D Model - фото 3

3D модель MHQ2 Folding Mini Quadcopter - 3D Model - фото 4

(0) 74 113

Тип амортизаторов.

Recommended Configuration:

Motors: 2204 size 2300kv
Flight Controller + AIO ESC
5 inch Propellers
3S 1500mAh Battery
4s 1500mAh Battery (more power, not recommended for beginners)
Vibration Isolators

Refer to the gallery image above for a list of screws, spacers, and other small parts.

Print Settings:
A minimum print bed size of 200x200mm is required. The largest part should fit when rotated 45 degrees.

Required Hardware:
16x 6mm M2 or M3 bolts depending on motors used.
4x 18mm M3 bolts and 4x 20mm M3 bolts for the arms.
8x M3 nylon washers and 8x M3 thin metal washers for arms.
4x 18mm M3 bolts and 4x M3 lock nuts for the base.
4x 18mm M3 bolts and 4x M3 lock nuts for landing gear.
35mm M3 female threaded spacers for standoffs with 12x 5mm M3 bolts.