Create Your Own Fully Detailed Destiny Ghost Companion Model

admin | 05.12.2025

Previous model Next model

3D Preview

Loading 3D model...

LMB: Rotate | Scroll: Zoom | RMB: Pan

Gallery (14)

3D модель Create Your Own Fully Detailed Destiny Ghost Companion Model - фото 1

3D модель Create Your Own Fully Detailed Destiny Ghost Companion Model - фото 2

3D модель Create Your Own Fully Detailed Destiny Ghost Companion Model - фото 3

3D модель Create Your Own Fully Detailed Destiny Ghost Companion Model - фото 4

(0) 66 130

Create your own fully detailed model of Destiny's Ghost companion! Fully printable without supports. More details on printing under the Instructions Tab.

I like having it assembled with magnets, but I understand some people may want it 100% printable. If there is enough interest, I will alter the model to fully snap together without magnets.

Printing Instructions:

Black_Pieces.STL: Suggested Settings: Black PLA, 225°C, 15% fill, 2 shell, 0.12mm layer height, Raft Optional. NO SUPPORTS.
Wing_Set.STL: Print two of these to make one model. White PLA, 225°C, 15% infill, 2 shell, 0.12mm layer height, No raft, No supports.
Diffuser_Ghost.STL: Transparent Blue or Aqua filament, 225°C, 15% infill, 2 shell, 0.20mm layer height, no raft, no supports.
Pins.STL: Any color, 0.2mm layer height, 2 shell.
Tips.STL: Orange PLA, 2 shell, 15% infill, 0.12mm layer height, No raft, No supports.

The wings have built-in rafts to aid in keeping the corners down. Trim these off afterwards with a deburring tool or razor blade. Use good super glue or 2-part epoxy to glue the Neodymium magnets to the body and the inside of the wings. Pay very close attention to the orientation of the magnets so that the correct sides attract each other. The