Universal Spool Holder 18-56mm II, 606ZZ/608ZZ

admin | 05.12.2025

Loading 3D model...

LMB: Rotate | Scroll: Zoom | RMB: Pan

(0) 76 92

The spool holder is designed for spools with hole sizes ranging from 25 to 70 mm using a 608 bearing.

Instructions:

You need to drill out or clean up the thin boundary above the bearing after printing.
A spacer should be added between the bearing and the holder to prevent binding.
Note that the hole for the bearing is a tight fit (22mm), and you may need to enlarge the diameter slightly depending on your printer's calibration.
You can use a clip instead of a nut for quicker spool changes. The top side of the clip (as printed) should face the bearing.