3D Printer Rigidity Upgrade
admin | 05.12.2025
3D Preview
Loading 3D model...
Gallery (19)
This kit will add rigidity to your printer, resulting in better print quality. The design uses two 8mm or 5/16" threaded rods, which lock at the bottom and have adjustment at the top. These rods brace the Z axis towers to the front of the Y axis, keeping them vertical and square to the build plate.
There are also two braces for the Y-axis, front and rear. These enable the Y belt to be correctly tensioned, preventing motor torque from pulling the frame ends together. No need to drill new holes in the printer, but some short screws need to be replaced with longer ones (10mm); the short screws can be reused for the Y braces.
Please refer to the
-
NutPlug.rsdocDownload
-
Balls.stlDownload
-
BallsMk2.rsdocDownload
-
BallsMk2.stlDownload
-
PrusaFull3.4.rsdocDownload
-
BackFootLeft.2.2.stlDownload
-
BackFootRight.2.2.stlDownload
-
BottomRightForBalls_fixed.stlDownload
-
BottomLeftForBalls_fixed.stlDownload
-
TopLeft_fixed.stlDownload
-
TopRight_fixed.stlDownload
-
Foot_Rear_Right_fixed.stlDownload
-
Foot_Rear_Left_fixed.stlDownload
-
BottomLeftForOneNut_fixed.stlDownload
-
BottomRightForOneNut_fixed.stlDownload
-
Front_Y_Brace.3.stlDownload
-
Plate1.stlDownload
-
Plate2.stlDownload
-
Back_Y_Brace.5.stlDownload
-
Back_Y_Brace.4.stlDownload
-
NutPlugRight.stlDownload
-
NutPlugLeft.stlDownload
-
Back_Y_Brace.5.rsdocDownload
-
Back_Y_Brace.4.rsdocDownload
-
Front_Y_Brace.3.rsdocDownload
-
BallsMk2.rsdocDownload
-
BackFootLeft.2.rsdocDownload
Please login to post comments.
Information
- Author: admin
- Date: 05.12.2025
- Category: 3D Printing
- Views: 69
- Downloads: 252
- Likes: 0
- Images: 19
- Files: 27
Download ZIP
