Modular Mounting System

This project is a mounting system for lightweight objects such as phones and small cameras. The joint is compatible with GoPro mounts.

Phone clamp assembly video: Watch video

Features:

• Modular design for flexible use.
• Allows mounting most phones and small cameras onto various objects.
• The included phone clamp securely holds devices ranging from 55mm to 95mm wide (e.g., iPhone 4 - iPhone 12 Pro Max and larger).
• Clamp hook is angled to prevent accidental side button presses on the phone.
• Modules are compatible with GoPro equipment.
• Standard M5 bolts and nuts included in the design. It is recommended to use metal bolts and nuts for the arms.

Applications:

• Phone/Camera/GoPro mount.
• Desk stand for phone/camera.
• Headphone stand.
• And many more applications in the REMIX section of the original page.

Printing Settings:

• It is highly recommended to print with full support for the parts in this project, which will result in a flat bottom and improved mechanical performance.
• The orientation of the STL files is well thought out; print in the current orientation unless problems arise.
• Reorienting the arms to save support material is not recommended.
• The bolt is horizontally oriented for optimized strength. Bottom teeth are trimmed for easier printing.
• Only the phone clamp bolt (M5x65) is recommended for the printed version. All arm bolts should be metal if possible.

Notes:

• Extending the arm too long is not recommended, as standard filament may not handle high lateral loads, leading to instability.
• The arms are optimized to remain still.
• If using this design as a selfie stick or for similar purposes, please consider material strength and use at your own risk.

Useful Parts and Bases:

• Tripod style base - good for small printers.
• Car vent mount.
• 2020 extrusion / screw to surface.
• 3030 extrusion.
• Tripod mount.
• Small clamp.
• Bike bracket.
• Zip tie bike mount.
• Bolted bike mount.
• Airplane seat mount.
• CR10 mount.