3D Models for AOS Cine35 EVO Camera
admin | 07.12.2025
3D Preview
Loading 3D model...
LMB: Rotate | Scroll: Zoom | RMB: Pan
Gallery (19)
This model features various 3D print designs compatible with the AOS Cine35 EVO camera, including:
- Camera mounts: Recommended to print in TPU with high infill. Suitable sizes: 1.5-2.5 mm depending on the camera.
- 20x20 mm GPS: Print in TPU with 30-50% infill, printing at a 45° angle is advised to avoid supports.
- XT60 Pigtail: Print in TPU, secured with M2 screws.
- 32 mm M3 Triple Antenna Mount: Print in TPU with 30-50% infill.
- Full and Half Height Duct Guards: Print in TPU with 10-30% infill, modifications may be needed for convenient installation.
- Accessories for DJI O4 and O4 Pro: Print in TPU, PETG, or PLA depending on the part.
Make sure to remove the top standoff for compatibility with EVO frames and O4 Pro camera.
-
AOS_Cine35_EVO_Full_height_duct_guards.STLDownload
-
AOS_Cine35_EVO_Half_height_duct_guards.STLDownload
-
XT60_Pigtail.STLDownload
-
32mm_M3_Triple_Antenna_mount.STLDownload
-
EVO_Go_Pro_Mount.STLDownload
-
AOS_EVO_Camera_Mount_5mm.STLDownload
-
AOS_EVO_Camera_Mount_4.75mm.STLDownload
-
AOS_EVO_Camera_Mount_4.5mm.STLDownload
-
AOS_EVO_Camera_Mount_2mm.STLDownload
-
AOS_EVO_Camera_Mount_2.25mm.STLDownload
-
AOS_EVO_Camera_Mount_2.5mm.STLDownload
-
AOS_EVO_Camera_Mount_1.75mm.STLDownload
-
AOS_EVO_Camera_Mount_1.5mm.STLDownload
-
2x_O4_Gummy_for_Evo_screw_required.STLDownload
-
20x20mm_GPS.STLDownload
-
2x_O4_Pro_Plate.STLDownload
-
2x_O4_Pro_Plate_ND_filter.STLDownload
-
2x_O4_Plate.STLDownload
Please login to post comments.
Information
- Author: admin
- Date: 07.12.2025
- Category: Other
- Views: 72
- Downloads: 211
- Likes: 0
- Images: 19
- Files: 18
Download ZIP
Model Author
Similar models
Recently viewed
×
❮
![]()
❯