3D Models for AOS 5 EVO
admin | 07.12.2025
3D Preview
Loading 3D model...
LMB: Rotate | Scroll: Zoom | RMB: Pan
Gallery (19)
This set of 3D models is designed for use with the AOS 5 EVO. It includes the following components:
- Camera Mount: Recommended TPU with high infill for various camera types.
- 20x20mm GPS: Print in TPU with 30-50% infill at a 45-degree angle to avoid supports.
- XT60 Pigtail: Print in TPU, secured with M2 screws and nuts.
- 32mm M3 Triple Antenna Mount: Print in TPU with 30-50% infill.
- EVO Go Pro Mount: Print in TPU with over 50% infill.
- AOS 5 and 5.5 EVO Arm Guards: Print in solid TPU for both left and right sides.
For use with DJI O4 or O4 Pro:
- 2x O4 Gummy for Evo (screw required) - Print in TPU.
- 2x O4_Plate - Print in TPU, PETG, or PLA.
- 2x O4_Pro_Plate - Print in TPU, PETG, or PLA.
- 2x O4_Pro_Plate_ND_Filter - Print in TPU, PETG, or PLA.
For AOS 5 frames and O4 Pro camera, it is recommended to remove the top standoff.
-
AOS_5_and_5.5_EVO_Arm_Guard_Left.STLDownload
-
AOS_5_and_5.5_EVO_Arm_Guard_Right.STLDownload
-
XT60_Pigtail.STLDownload
-
32mm_M3_Triple_Antenna_mount.STLDownload
-
EVO_Go_Pro_Mount.STLDownload
-
AOS_EVO_Camera_Mount_5mm.STLDownload
-
AOS_EVO_Camera_Mount_4.75mm.STLDownload
-
AOS_EVO_Camera_Mount_4.5mm.STLDownload
-
AOS_EVO_Camera_Mount_2mm.STLDownload
-
AOS_EVO_Camera_Mount_2.25mm.STLDownload
-
AOS_EVO_Camera_Mount_2.5mm.STLDownload
-
AOS_EVO_Camera_Mount_1.75mm.STLDownload
-
AOS_EVO_Camera_Mount_1.5mm.STLDownload
-
2x_O4_Gummy_for_Evo_screw_required.STLDownload
-
20x20mm_GPS.STLDownload
-
2x_O4_Pro_Plate.STLDownload
-
2x_O4_Pro_Plate_ND_filter.STLDownload
-
2x_O4_Plate.STLDownload
Please login to post comments.
Information
- Author: admin
- Date: 07.12.2025
- Category: Other
- Views: 70
- Downloads: 182
- Likes: 0
- Images: 19
- Files: 18
Download ZIP
Model Author
Similar models
×
❮
![]()
❯