Ventilation Cover for 60mm Tubes
admin | 08.12.2025
3D Preview
Loading 3D model...
LMB: Rotate | Scroll: Zoom | RMB: Pan
Gallery (7)
This model features a multi-piece design for a ventilation cover intended for the open ends of 60mm tubes.
The mesh includes multiple small holes to prevent critters from entering the tube while allowing adequate airflow.
Construction Features:
- The mesh should be installed first, followed by the clamp ring.
- An M4 flathead screw and corresponding nut are required for assembly.
- The mesh connects to the lid using 6 screws measuring 3x10mm.
- The lid is secured to the clamp ring with 2 screws measuring 3x13mm.
- Avoid over-tightening the screws.
Printing Recommendations: The model prints well; follow the provided instructions for optimal results.
Category
Please login to post comments.
Information
- Author: admin
- Date: 08.12.2025
- Category: Other
- Views: 130
- Downloads: 104
- Likes: 0
- Images: 7
- Files: 4
Download ZIP
Model Author
Similar models
×
❮
![]()
❯