Modern Mirrors for Honda VFR800 Interceptor

These mirrors are a modern, aerodynamic, and sleek upgrade over the stock mirrors for the 6th generation Honda VFR800 Interceptor.

Installation Instructions:

• The mirrors bolt to the stock bases using the original hardware (a black socket cap bolt and 4 washers).
• The 360-degree swiveling mirror head attaches with an M6 bolt and corresponding hex nut (2 bolts and nuts total).
• There is a circular recess in the stalk for a small M6 washer which I have included the STL for above; the washer's thickness determines the gap between the mirror stalk and swivel.
• The mirror glass must be custom cut; I recommend finding a cheap mirror (max ~3.5mm thick) and using the provided stencil as a cutting guide.
• Glue the mirror glass onto the swivels with a strong epoxy, ensuring to sand the plastic part first for better adhesion.
• Print Setup:
• Printer: Creality Ender 3 v3 KE
• Material: Bambu high speed PETG
• Support: Tree supports (for angles >60 degrees)
• Infill: 25% (cubic)
• Print with stalks and swivels upright on the leading edge.
• It’s recommended to use a sticky bed or a raft as the edges may warp.