3D Model with USB Ports

admin | 04.12.2025

Previous model Next model

3D Preview

Loading 3D model...

LMB: Rotate | Scroll: Zoom | RMB: Pan

Gallery (21)

3D модель 3D Model with USB Ports - фото 1

3D модель 3D Model with USB Ports - фото 2

3D модель 3D Model with USB Ports - фото 3

3D модель 3D Model with USB Ports - фото 4

(0) 69 53

USB ports need to be added manually. Feel free to remove them and replace them with something else if you desire. If you want to keep them, you can either solder them together manually or use a pre-made board similar to ones available on Amazon.

Make sure to glue the LED strip light hole if you plan on using one, although it's not essential. Print with supports if needed. I printed with 10% infill, and it worked well, but you may need to add weights.

Refer to the Cura layout image for optimal arrangement during printing. The model has a removable part at the back which needs to be hot glued shut once the USB ports and lighting cables are attached. Alternatively, consider making this out of wood or another material. A Fusion 360 file is attached for further modifications.