230 Size Quadcopter - 3D Model
admin | 05.12.2025
3D Preview
Loading 3D model...
LMB: Rotate | Scroll: Zoom | RMB: Pan
Gallery (9)
Build yourself a lightweight and strong 230 size quadcopter frame. All parts printed at 0.2mm layer height and 3 perimeters.
- Top and Bottom frames, HDcam and FPVcam @ 30% infill x 1 each.
- Arms @ 100% infill x 4.
- Arm Support @ 100% infill x 2.
Suggested Setup:
- Motor: RacerStar 1806 2280kv or Racerstar 2204 2300KV.
- ESC: Racerstar RS20Ax4 20A 4 in 1 (inbuilt PDB).
- Prop: 10 Pairs GEPRC 5040 V2 5 Inch 3 Blade Propeller.
- Flight Controller: F3 Acro or F4 with Current Sensor.
- Battery: ZOP 3S 1100mah 65c or ZOP 4S 1100mah 65c.
- LiPo Battery Charger: iMAX B6 Digital RC Lipo Balance Charger.
- Remote Control: FlySky FS-i6 or FrSky Taranis Transmitter and FrSky XM+ Receiver.
HDcam mounting strap slots compatible with Mobius, RunCam, and GoPro.
Non-printed parts required:
- 12 x M3x10mm countersunk screws for Top/Bottom frame.
- 6 x M3x40mm Nylon Spacers for Top/Bottom frame.
- 8 x M3x12mm countersunk screws for Arms.
- 8 x M3 Nyloc nuts for Arms.
- 3 x Vibration Ball Dampeners for HDcam.
Please login to post comments.
Information
- Author: admin
- Date: 05.12.2025
- Category: Hobby & RC
- Views: 75
- Downloads: 97
- Likes: 0
- Images: 9
- Files: 9
Download ZIP
Model Author
Similar models
×
❮
![]()
❯